Company News

Industry News

Waterproof ventilation valve maintenance matters needing attention

Release time:

2024-04-29 14:43

Source:

Waterproof ventilation valve is a commonly used protective component in electronic equipment, which is used to prevent moisture and dust from entering the inside of the equipment, while allowing the free flow of gas. The following are some of the waterproof ventilation valve maintenance considerations:

1. Keep clean: regularly use warm water and neutral detergent to clean the waterproof ventilation valve to keep it running normally. When cleaning, care should be taken to avoid scratching the surface and to ensure that moisture ingress is minimized.

2. Check for damage: regularly check whether the waterproof ventilation valve is damaged or scratched. If damage is found, a new waterproof ventilation valve should be replaced immediately.

3. Check the tightness: ensure that the waterproof and permeable valve is installed correctly, and check whether the seal is intact. If necessary, replace the seal or use transparent easy-peel tape to increase the tightness.

4. Check the breathing passage: regularly check whether the breathing passage of the waterproof ventilation valve is blocked, and regularly clean the passage to ensure breathability.

5. Avoid exposure: waterproof ventilation valve should avoid exposure to direct sunlight. Excessive sun exposure may cause them to swell, age and fail. If you need to expose it to the outdoors in the hot summer, you should consider placing shading equipment next to it to reduce the temperature and avoid direct sunlight.

6. Choose the right waterproof ventilation valve: Different equipment may require different types of waterproof ventilation valves. When choosing a waterproof ventilation valve, it should be selected according to the actual needs of the equipment and the use environment.

In short, the correct maintenance and use of the waterproof and permeable valve can extend its service life and ensure the safe and stable operation of the equipment.

Pre

What are the obvious signs of the aging of the seals of the waterproof ventilation valve?

What are the recommend tools for de-icing the external icing of the valve body?

Next

Related News

What are the obvious signs of the aging of the seals of the waterproof ventilation valve?

Degradation of the seal of the waterproof vent valve may cause the following obvious signs:

Waterproof ventilation valve maintenance matters needing attention

Waterproof ventilation valve is a commonly used protective component in electronic equipment, which is used to prevent moisture and dust from entering the inside of the equipment, while allowing the free flow of gas. The following are some of the waterproof ventilation valve maintenance considerations:

What are the recommend tools for de-icing the external icing of the valve body?

In cold conditions, ice may form on the outside of the valve body. In order to effectively remove the ice layer, the following recommend of tools can be used:

What is waterproof ventilation valve?

The waterproof ventilation valve is a device that can realize the outward expansion of water molecules and the expansion of gas in the sealed state of the object. It is mainly composed of waterproof breathable membrane, valve body and valve core and other components, in which the waterproof breathable membrane occupies its main production cost. There are many kinds of waterproof ventilation valves, which can be divided into metal waterproof ventilation valves and plastic waterproof ventilation valves according to different materials. According to different installation methods, it can be divided into snap-in waterproof ventilation valve, threaded waterproof ventilation valve, press-in waterproof ventilation valve, etc. According to different gas flow directions, it can be divided into two-way waterproof ventilation valve and one-way waterproof ventilation valve. According to different connection methods, it can be divided into welding type waterproof breathable valve, injection molding type waterproof breathable valve, bonding type waterproof breathable valve, etc.

How long is the maintenance cycle of waterproof ventilation valve?

The maintenance cycle of the waterproof ventilation valve varies with the use environment and frequency, but it is usually recommended to check at least once a year. The following are some recommended maintenance steps:

When the waterproof ventilation valve is damaged, what are the quick judgment methods?

When the waterproof ventilation valve is damaged, the problem can be identified by the following quick judgment methods: